PTFE Tapes

Add to cart

3 Types available

Water WRC and WRAS Approved.

PTFEGAS Spec: BS.EN.751-3 1997 -60 deg C to +260 deg C

Euro Bond 577 Pipe Seal

Add to cart
Pipe Sealant EBA577 is a low strength, high viscosity gel paste which cures rapidly, sealing instantly to 10 bar on metals in the absence of air. When fully cured it resists pressure up to 350 bar. EBA577 is not suitable for oxygen systems. Resistant to Ethanol, Motor Oil, Unleaded Petrol, Acetone and Brake Fluid.

400G Boss White

Add to cart
This 400g tub of Boss White pipe jointing compound can be used to seal threaded joints on non-drinking water pipes. Suitable for use with hot and cold water (non-potable), natural gas and low pressure steam.

400G Boss Green

Add to cart
400g A potable water pipe jointing compound for drinking water applications. Conforms to BS 6956-5:1992 for hot and cold water systems to 7 bar, Natural Gas and low pressure steam and temperatures up to 200°C. WRc plc approved

Joining Paste (-40°C to 400°C)

Add to cart
400g Tin. Stag 'A' is a thin non-setting jointing for use on small joints which are new and undamaged. Easy-break. Resistant to gas, steam, water, petrol, oil and mineral acids. Lead-free.

Joining Paste (-40°C to 650°C)

Add to cart
400g Tin. Stag 'B' is a thick non-setting jointing compound for use on surfaces made uneven by corrosion or heavy tool marks etc. Easy-break. Resistant to gas, steam, water, petrol, oil and mineral acids. Lead-free.

Hank Dressed Hemp (used with Paste)

Add to cart
Jointing paste

55 Thread Sealing Cord- 50Mtrs

Add to cart
Can be safely applied on metal and plastic threaded fittings Potable Water: WRC Listed for use with potable water up to 85°C, meets BS6920" KTW recommendation for cold and hot water,Gas and Water: Carries the German DVGW Approval together with DIN30660 tested in accordance with EN751-2 Class ARp.Certified to ANSI/NSF standard 61

Identification Tapes for Pipework

Add to cart

48mm x 33m rolls.

Description denotes the printed text on the tape.